1 · Product
Get this blank from MKR Supply ↗ · partner link
Where these numbers come from
Measure the outside with calipers: across the rim, across the base, the height without the lid, and the straight band you can engrave.
2 · Artwork
SVG stays as vectors in the laser file. A PNG or JPEG engraves by its darkness.
3 · Layout
Each number is one of your graphics: the number on its tile above. Type them in the order you want them round the cup, and the sequence repeats all the way round. 1 1 2 gives two of graphic 1, then one of graphic 2, then again.
Art on a curved wall looks narrower than it is. 0.25–0.40 in across looks right on most 2–3 in logos; Auto uses 12% of the width.
4 · Laser file
The file is one turn of the cup wide and the band tall, so set your rotary to the diameter above and it lands exactly where the preview shows. LightBurn's Rotary Setup reads it as Y; mirror the rotary axis there if your art comes out backwards.
5 · Client proof
Front and back views, the design's size and placement, the product and color, and an approval line, as a PDF or PNG for your customer.
Drag the art to move it. Everything left of the left seam continues at the right: it's one turn of the cup.