1 · Your design
From hard-edged geometric facets to smooth, flowing curves: the AI draws in this style, and the cut lines follow it.
Flat-color artwork cuts cleanest: clip art, a coloring page filled in, a stained-glass or paint-by-numbers pattern. A photo works best through , where the AI redraws it as flat pieces first. Your artwork is cut up here in your browser, free.
The AI draws flat shapes in about half a minute: wood tones from a description, the photo's own colors from a photo. Cutting it into pieces and the files are free.
2 · Panel size
The height follows the design's shape.
3 · Pieces
Eyes, brows, stars and badges too small to cut, or too dark for the wood they'd be cut from, go on the piece they sit in instead: dark ones engraved (black), light ones outlined (red), like the thin dark lines of scales, veins and feathers.
4 · Materials
Each layer is one LightBurn layer, cut from one material: Houston Acrylic's TruFlat wood (pre-finished, so a color no finish matches is cut from TruFlat Paint and painted), their acrylic, or your own hardwood. Or cut every layer from one board and paint or stain each its color. Click a piece in the preview to move it to another layer.
Partner links: LZRsuite may earn a commission.
5 · Files
Where each wood is cut on its own, each piece is cut half the kerf outside its line, so neighbours fit tight. 0 cuts on the line: then set LightBurn's own kerf offset.
The whole panel, a layer per wood
Every piece in place, a LightBurn layer per wood (blue C01, green C03, yellow C04…), detail lines red C02, numbers and the outline gray C08 (a guide: switch its output off). Put in one wood's board and turn on just its layer.
One board, stained
The whole panel cut from one board like a jigsaw: every line between two pieces cut once, on the line, all blue. Stain each piece its wood's color by its number, then fit them back together. Neighbours share each cut, so the kerf is the glue line.
Cut sheets a file per material
Assembly guide
Free. Saving files needs a free account (Google, Apple or email). Files open in LightBurn at true size; check each layer's settings and test the fit on scrap first.