← All tools

Shape Filler

by LZRsuite · fill any outline with scroll work, hunting scenes, gears or your own artFiber, CO₂ & diode · metal, wood, leather

1 · The shape

A blade, a grip panel, a slide, a plaque: any closed outline. Lines inside it become holes that stay clear. A photo works best shot straight down on plain white paper, with no shadow.

Designing a knife? Knife Designer sends its blade, scales and bolsters here.

2 · Margin and keep-clear

Drag a keep-clear area over anything the art must leave alone: a logo, a screw, the maker's markings and the serial number, which must stay readable. Drag its corner to size it.

3 · The fill

The AI draws to fit your exact shape; this page traces it into clean vectors trimmed to the edge. About 20 seconds.

4 · Laser and files

3D engraving

Layers: the art black (C00, engrave as a fill), the border line red (C02, score), and the outline blue (C01, cut last) only when the part is cut out: the files hold only what fires. The PNG is the engraving alone at true size, for photo-mode engraving. The 3D PNG is a depth map at true size: darker shades cut deeper, and white, the raised art included, is left untouched. Test on scrap first.

Open a DXF, SVG or photo of your part, or draw a shape, then pick what fills it.

Save this design?

About Shape Filler

How does Shape Filler work?

Bring in the outline: a DXF or SVG, a photo or drawing of the part on plain paper (then type its real length), a shape drawn on the page, or a blade, scale or bolster from Knife Designer. Set a margin and any keep-clear areas, then fill it: AI art drawn to fit, a pattern from the library, or your own art. Shape Filler traces the art into clean vectors and trims it exactly to the shape's edge.

Which lasers and materials does it suit?

All three kinds: a fiber on blades, bolsters and anodized aluminum, and a CO₂ or diode on wood, leather and acrylic. The laser you pick sets the finest detail kept and the PNG's resolution, and the preview shows the engraving on steel, black anodized, brass, wood or leather.

What files do I get?

SVG and DXF at true size for LightBurn, holding only what fires: the fill in black, to engrave as a fill, a border line in red to score, and the outline in blue when you cut the part out. Also a PNG of the engraving at true size for photo-mode engraving, and a 3D depth map for 3D engraving. A pair comes side by side, the same or mirrored for left and right panels.

Can it make 3D engraving files?

Yes. The 3D view shows the fill in relief, and the 3D PNG is its depth map at true size, darker shades cutting deeper and the raised art left white, untouched: 16-bit for LightBurn's 3D Sliced mode on a galvo fiber, or 8-bit for Grayscale mode on a CO₂ or diode. It comes already lightened (adjustable), so it slices as it is. The art stands up with rounded or pointed tops, is cut in V-shaped like a hand graver's cuts, or gets straight walls; set the depth and the page says how many passes to run. It's worked out from the fill itself, so it costs nothing more: one save covers it with the other files.

Can I fill grip panels and slides?

Yes: open the part's outline as a DXF, an SVG or a photo and fill it like any other shape. Put a keep-clear box over the maker's markings and the serial number: they must stay readable.

What does it cost?

An AI fill uses 2 credits, given back if it fails, and its files are yours to save; new accounts get 3 free credits. Patterns and your own art are free to design; saving them is free with Maker or Pro, otherwise 1 credit a shape, and saving that shape again with any fill stays free.